Fork Cameras
Specialized cameras designed for forklift and material handling equipment to provide enhanced visibility and safety during lifting operations.
MC9000 - Sturdy Fork Camera
The MC9000 fork camera is designed especially for forklift trucks and is mounted on the inside of the fork. This places the camera at the eye level of the pallet. Based on its pinhole size opening in the housing, the lens is protected from damage that may be caused by lattice boxes or pallets.
MC9150B - Heavy-duty Pinhole Camera
The MC9150B camera is designed especially for forklift trucks and is mounted to the back of the fork. The 50° viewing angle makes it possible to observe both forks. Based on its pinhole size opening in the housing, the lens is protected from damage that may be caused by lattice boxes or pallets. The camera has a very high shock- and permanently shock-resistant up to 100 g.
MC9250 - Sturdy Fork Camera
The MC9250 is mounted inside the fork tip, meaning it is always at the same level as the pallet. The pinhole lens and the associated pin-prick sized opening in the casing reduced the risk of load carrier damaging the lens.
MC925C - Fork-arm Mounted Camera
The fork-arm mounted camera MC925C meets the requirements of the EC regulations 89/336/EWG and 92/031/EWG (CE-EMV). There are two simple ways of optimizing the camera image in order to facilitate camera system operation. A support line connecting both fork ends should be directly applied to the display. The driver thus easily gets a good impression of the position and the height of the fork in relation to the shelf, helping him to manoeuvre both safer and faster. When working under low-light conditions such as dark halls, a simple but eye-catching hatch should be applied to the fork, e.g. using white colour.